顾名思义就是股票在前期的时候出现了涨停，随后出现了回调，但是又再次的上涨。个股先出现涨停，背后肯定是主力的行为；

封板之后的缩量回调是主力刻意洗盘，回马枪就是在这个波段回调的低点及时跟进，坐等主升浪的出现

什么是涨停回马枪

顾名思义就是股票在前期的时候出现了涨停，随后出现了回调，但是又再次的上涨。个股先出现涨停，背后肯定是主力的行为；

封板之后的缩量回调是主力刻意洗盘，回马枪就是在这个波段回调的低点及时跟进，坐等主升浪的出现

涨停回马枪具备的要点：

1、必须要有涨停板，因为涨停回马枪就是建立在涨停板的基础之上。

这里的涨停板可以是一字板，也可以是T字板或者是实体阳线，但是不能出现炸板。如果反复出现炸板，就是主力故意提供进场机会的假象，他们好趁机出货。

2、封板的力度要强，一般是最短的时间以最快的速度封板，同时封单非常巨大。

3、回调的时间不能超过8天，重点关注回调第3天和第5天的进场机会，如果超过8天就直接放弃。

4、个股属于当下的热点概念，比如新能源产业链，有热点加持，被主力关注的概率也就越大，后期上涨的动能也就更足。

5、量价互相配合，上攻要放量，回调要缩量。缩量回调说明回踩的空间有限，适合我们进场，如果是放量回调，那就直接放弃。

6、股市无绝对，每次交易之前都要制定好交易策略，并严格执行，比如止损点的话，我会选择涨停板的开盘价和最低点作为止损点！

如果个股符合以上涨停回马枪的技术要点，那么可以加入到自选股当中，同时在进场的时候，注意在回调充分，出现缩量时，可以考虑分批介入。

会买也要会卖，涨停回马枪的盈利点在7-8%左右，所以要及时止盈，不能太贪婪，每个月做1-2只这类型的股票，1年下来盈利也是非常可观，最关键的是看你能不能知行合一，有极高的自律能力。

保持对市场的敬畏，在震荡的市场行情中，比较适合这种主法，操作上建议大家低吸高抛，赚取稳稳的盈利，大家可以对着上面的5大核心点认真学习，相信市场不会辜负你正确的抉择。

选股源码如下：

XA_1:=REF(CLOSE,3)/REF(CLOSE,4)>1.09;

XA_2:=CLOSE/REF(CLOSE,1)>=1.031 AND BETWEEN(OPEN/REF(OPEN,3),1.1,0.91) AND LOW<REF(CLOSE,3) AND REF(CLOSE,1)/REF(CLOSE,2)<0.965 AND REF(CLOSE,1)<REF(OPEN,1) AND NOT(REF(HIGH,2)/REF(CLOSE,3)>1.09 AND REF(HIGH,2)/MAX(REF(CLOSE,2),REF(OPEN,2))>1.07) AND NOT(REF(CLOSE,2)<REF(OPEN,2) AND REF(OPEN,2)/REF(CLOSE,3)>1.09);

XA_3:=XA_1 AND XA_2;

XA_4:=REF(CLOSE,4)/REF(CLOSE,5)>1.09 AND REF(CLOSE,4)=REF(HIGH,4);

XA_5:=CLOSE/REF(CLOSE,1)>=1.031 AND BETWEEN(OPEN/REF(OPEN,4),1.1,0.91) AND LOW<REF(CLOSE,4) AND REF(CLOSE,1)/REF(CLOSE,2)<0.96 AND REF(CLOSE,1)<REF(OPEN,1);

XA_6:=NOT(REF(OPEN,3)/REF(CLOSE,3)>1.07 AND REF(OPEN,3)>REF(CLOSE,4) AND REF(CLOSE,3)<REF(LOW,4));

XA_7:=XA_4 AND XA_5 AND XA_6;

XA_8:=REF(CLOSE,5)/REF(CLOSE,6)>1.09 AND REF(CLOSE,5)=REF(HIGH,5);

XA_9:=CLOSE/REF(CLOSE,1)>=1.031 AND BETWEEN(OPEN/REF(OPEN,5),1.1,0.91) AND LOW<REF(CLOSE,5) AND REF(CLOSE,1)/REF(CLOSE,2)<0.96 AND REF(CLOSE,1)<REF(OPEN,1) AND NOT(REF(HIGH,4)/REF(CLOSE,5)>1.05 AND REF(HIGH,4)/MAX(REF(CLOSE,4),REF(OPEN,4))>1.07) AND NOT(REF(LOW,4)/REF(CLOSE,5)>1.02 AND REF(CLOSE,4)<REF(OPEN,4) AND MA(CLOSE,10)/OPEN>1.03 AND REF(OPEN,1)<REF(MA(CLOSE,10),1)) AND NOT(REF(OPEN,3)/REF(CLOSE,3)>1.07 AND REF(OPEN,3)>REF(CLOSE,4) AND REF(CLOSE,3)<REF(LOW,4) AND REF(CLOSE,4)/REF(CLOSE,5)>1.09);

XA_10:=XA_8 AND XA_9;

XA_11:=REF(CLOSE,6)/REF(CLOSE,7)>1.09 AND REF(CLOSE,6)=REF(HIGH,6);

XA_12:=CLOSE/REF(CLOSE,1)>=1.031 AND BETWEEN(OPEN/REF(OPEN,6),1.08,0.95) AND LOW<REF(CLOSE,6) AND REF(CLOSE,1)/REF(CLOSE,2)<0.96 AND REF(CLOSE,1)<REF(OPEN,1) AND MA(CLOSE,5)>MA(CLOSE,10) AND MA(CLOSE,10)>MA(CLOSE,20) AND MA(CLOSE,20)>MA(CLOSE,30) AND MA(CLOSE,30)>MA(CLOSE,60);

XA_13:=XA_11 AND XA_12;

XA_14:=REF(CLOSE,3)/REF(CLOSE,4)>1.09;

XA_15:=CLOSE/REF(CLOSE,1)>=1.031 AND BETWEEN(OPEN/REF(OPEN,3),1.1,0.91) AND LOW<REF(CLOSE,3) AND EVERY(MA(CLOSE,5)>MA(CLOSE,10),4) AND BETWEEN(REF(OPEN,1)/REF(MA(CLOSE,5),1),1.01,0.99);

XA_16:=XA_14 AND XA_15;

XA_17:=XA_3 OR XA_7 OR XA_10 OR XA_16;

XA_18:=REF(CLOSE,4)/REF(CLOSE,5)>1.09 AND REF(CLOSE,4)=REF(HIGH,4);

XA_19:=CLOSE/REF(CLOSE,1)>=1.031 AND REF(CLOSE,1)<REF(CLOSE,4) AND BETWEEN(REF(CLOSE,1)/REF(CLOSE,2),1.015,0.985) AND OPEN<REF(CLOSE,4) AND OPEN<MA(CLOSE,5) AND EVERY(REF(MA(CLOSE,5),1)>REF(MA(CLOSE,10),1),2);

XA_20:=REF(HIGH,1)>REF(CLOSE,1);

XA_21:=NOT(REF(CLOSE,1)>REF(OPEN,1) AND REF(CLOSE,1)/REF(OPEN,1)>1.03);

XA_22:=XA_18 AND XA_19 AND XA_20 AND XA_21;

XA_23:=REF(CLOSE,3)/REF(CLOSE,4)>1.09 AND REF(CLOSE,3)=REF(HIGH,3);

XA_24:=CLOSE/REF(CLOSE,1)>=1.031 AND REF(CLOSE,1)<REF(CLOSE,3) AND (REF(CLOSE,1)/REF(CLOSE,2)<0.96 AND REF(CLOSE,1)<REF(OPEN,1) AND REF(OPEN,1)/REF(CLOSE,1)<1.01) AND OPEN<REF(CLOSE,3) AND OPEN<MA(CLOSE,5) AND EVERY(REF(MA(CLOSE,5),1)>REF(MA(CLOSE,10),1),2);

XA_25:=REF(HIGH,1)>REF(CLOSE,1);

XA_26:=XA_23 AND XA_24 AND XA_25;

XA_27:=REF(CLOSE,3)/REF(CLOSE,4)>1.09 AND REF(CLOSE,3)=REF(HIGH,3);

XA_28:=CLOSE/REF(CLOSE,1)>=1.031 AND REF(CLOSE,1)<REF(CLOSE,3) AND (REF(CLOSE,1)<REF(OPEN,1) AND REF(OPEN,1)/REF(CLOSE,1)<1.01) AND OPEN<REF(CLOSE,3) AND OPEN<MA(CLOSE,5) AND EVERY(REF(MA(CLOSE,5),1)>REF(MA(CLOSE,10),1),3);

XA_29:=REF(HIGH,1)>REF(CLOSE,1);

XA_30:=XA_27 AND XA_28 AND XA_29 {2};

XA_31:=NOT(REF(CLOSE,4)/REF(CLOSE,5)>1.095 AND REF(CLOSE,3)/REF(CLOSE,4)<0.92 AND REF(OPEN,3)>REF(CLOSE,4) AND REF(CLOSE,3)<REF(OPEN,4));

XA_32:=XA_22 OR XA_26 OR XA_30 AND XA_31;

XA_33:=DYNAINFO(4)>0;

XA_34:=IF(NAMELIKE(1),0,1) AND IF(NAMELIKE(2),0,1);

XA_35:=IF(CODELIKE(3),0,1);

XA_36:=XA_33 AND XA_34 AND XA_35;

回马枪:XA_17 OR XA_32 AND XA_36;