指标说明

首先看一下主图（黑马拉升），此主图主要是分析趋势上拐和下挫点位，给到最准确的信号（进、出、牛窝、准备、逃顶等），根据提示可以做出相应的判断。然后副图是（至尊版MACD），这个指标是由系统版的MACD指标强化而来，主要分析金叉死叉点位，然后就是最佳的上拐下挫信号（箭头符号），根据信号和自己的经验做出最佳的判断。

由于源码过多，这里就只把副图发出来。

至尊版MACD源码

LONG:=26;SHORT:=12;M:=9;

DIFF:=EMA(CLOSE,SHORT)-EMA(CLOSE,LONG);

DEA:=EMA(DIFF,M);

MACD2:=2*(DIFF-DEA);

(CLOSE<0 AND CROSS(DIFF,0),H*1.3),COLOR000080,NODRAW;

(CLOSE<0 AND CROSS(MACD2,0),H*1.3),COLOR000080,NODRAW;

(CLOSE<0 AND CROSS(0,DIFF),H*1.3),COLOR808080,NODRAW;

(CLOSE<0 AND CROSS(0,MACD2),H*1.3),COLOR808080,NODRAW;

DU0:=CROSS(DIFF,0);

UD0:=CROSS(0,DIFF);

TDU0:=BARSLAST(DU0);

TUD0:=BARSLAST(UD0);

DU3:=REF(DU0,1);

UD3:=REF(UD0,1);

TDU3:=BARSLAST(DU3);

TUD3:=BARSLAST(UD3);

UDGLINE:=IF(TDU3<TUD3,REF(HHV(HIGH,2),TDU3),REF(LLV(LOW,2),TUD3));

JDU0:=REF(CLOSE,1)<=REF(UDGLINE,1) AND CLOSE>UDGLINE AND TDU0<TUD0;

JUD0:=REF(CLOSE,1)>=REF(UDGLINE,1) AND CLOSE<UDGLINE AND TUD0<TDU0;

JDU1:=JDU0 AND COUNT(JDU0,TDU0)=1;

JUD1:=JUD0 AND COUNT(JUD0,TUD0)=1;

JDU2:=JDU1 AND REF(BARSLAST(JUD1),1)<REF(BARSLAST(JDU1),1);

JUD2:=JUD1 AND REF(BARSLAST(JUD1),1)>REF(BARSLAST(JDU1),1);

JDU3:=JDU1 AND REF(BARSLAST(JUD1),1)>REF(BARSLAST(JDU1),1);

JUD3:=JUD1 AND REF(BARSLAST(JUD1),1)<REF(BARSLAST(JDU1),1);

BSLINE:=IF(BARSLAST(JDU2)<BARSLAST(JUD2),IF(REF(CROSS(0,MACD2),1),LLV(LOW,2),REF(LLV(LOW,2),BARSLAST(REF(CROSS(0,MACD2),1)))),IF(REF(CROSS(MACD2,0),1),HHV(HIGH,2),REF(HHV(HIGH,2),BARSLAST(REF(CROSS(MACD2,0),1)))));

STICKLINE(MACD2>=0,0,MACD2,2,1),COLOR0000FF;

STICKLINE(MACD2>=0 AND MACD2<REF(MACD2,1),0,MACD2,2,0),COLOR0000FF;

STICKLINE(MACD2<0,0,MACD2,2,0),COLORFFFF00;

STICKLINE(MACD2<0 AND MACD2>REF(MACD2,1),0,MACD2,2,1),COLORFFFF00;

DIF:DIFF,LINETHICK2,COLOR0000FF;

MACD:DEA,COLORFF0000;

DEF:MACD2,LINETHICK0,COLORFFFF00;

STICKLINE(CLOSE>0,0,0,2,0),COLOR808080;

DEFUT:=BARSLAST(CROSS(MACD2,0));

DEFDT:=BARSLAST(CROSS(0,MACD2));

DEFUL:=IF(MACD2>=0,HHV(MACD2,DEFUT+1),REF(HHV(MACD2,DEFUT+1),DEFDT+1));

DEFDL:=IF(MACD2<0,LLV(MACD2,DEFDT+1),REF(LLV(MACD2,DEFDT+1),DEFUT+1));

DEFU2L:=REF(DEFUL,DEFUT+1);

DEFD2L:=REF(DEFDL,DEFDT+1);

DRAWICON(LLV(MACD2,4)>0 AND MACD2<REF(MACD2,1) AND REF(MACD2,1)>REF(MACD2,2) AND REF(MACD2,2)>REF(MACD2,3),MACD2,2);

DRAWICON(HHV(MACD2,4)<0 AND MACD2>REF(MACD2,1) AND REF(MACD2,1)<REF(MACD2,2) AND REF(MACD2,2)<REF(MACD2,3),MACD2,1);